• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Henan, China (Mainland)
  • Brand Name: Winsen
  • Model Number: ZPH01-MP503
  • Usage: Gas Sensor, Harmful gas detector, air cleaner, automatic exhaust device
  • Theory: Resistance Sensor
  • Output: Switching Transducer
  • Sensor Type: Flat Surfaced Semiconductor Gas Sensor
  • Target Gas: alcohol, smoke, formaldehyde, toluene, acetone, benzene, lighter gas
  • Detection Range: 1~50ppm
  • Ph (Heater Consumption): ≤ 300mW
  • Product name: mp901
  • Application: Air Conditioner
  • Certificate: ROHS

Packaging & Delivery

Packaging Details ZP01-MP503 dust sensor pm2.5 pm5 pm10 voc sensor module for Air quality monitor
outside: carton
or as your requirement
Delivery Time Shipped in 5 days after payment

ZP01-MP503 to detect formaldehyde, benzene, carbon monoxide, hydrogen,alcohol, ammonia,voc sensor module for Air quality monitor

Product Description

ZPH01-MP503 ZP07 air-quality module adopts flat surface semiconductor gas sensor. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of cigarette, essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.

 

Features

High sensitivity

Low power consumption, long life

Calibrated before shipment

10 seconds to 3 minutes with auto-preheating function

Faulty auto-check, High cost-effective

Application

Air cleaner, fresh-air system, intelligent integrated ceiling, air quality detector, ventilator, air-condition.

 

Parameters


Sensor

Air quality sensor

Target Gas

formaldehyde, benzene, carbon monoxide, hydrogen,alcohol, ammonia, smoke of cigarette, essence &etc.

Physical Interface

XH2.54-4P terminal sockets

Output Data

0-3 grade pollution signal

Working Voltage

5.0±0.2V DC (No voltage reverse connect protection)

Output Data

TTL level (200ohm protected resistance inside)

Working Current

≤60mA

Warm Up Time

≤3 min

Response Time

≤20s

Recovery Time

≤60s

Operating Temperature

0~50

Operating Humidity

≤95%RH

Storage Temperature

-20~60

Storage Humidity

≤60%RH

Size

24×20×15mm(L×W×H)

Weight

≤ 20g

Sensitivity Attenuator

≤1%/year

Life Span

≥5 years

Packaging & Shipping

ZP01-MP503 to detect formaldehyde, benzene, carbon monoxide, hydrogen,alcohol, ammonia,voc sensor module for Air quality monitor

Packing:

50pcs/foam plate, then packed in cartons.

for small order, packed in bubble bags.

Shipping:

Door to door Express (UPS, TNT,FedEx, TNT)

TNT: about 5-7 working days could reach your side normally

EMS: need 10-15 working days to reach your side

UPS: special express for North America,need 3-5 working days

DHL: normally 3-5 working days could reach your side

FEDEX: normally 3-10 working days could reach US and European

 

Our Services

Advantages
1. Cost benefit
2. In-house design from chip, sensor to module
3. Adjustable alarm threshold for CO2 switch application
4. Altitude compensation function
5. Open drain output
6. Field re-calibration is possible
7. Module ready

 

Company Information

 

Zhengzhou Winsen Electronics Technology Co., Ltd is a hi-tech enterprise, specialized in developing, manufacturing and marketing various types of sensors.

 

Including:

1. Gas sensor and module for

    oxygen(o2)

    carbon dioxide (co2)

    toxic gases such as CO, H2S, NH3, HCL, SO2, NO2, CL2, ETO...etc.

    combustible gases such as methane, propane, butane, hydrogen

    air quality: VOC, alcohol, smoke, formaldehyde, toluene, acetone, benzene... etc

2. Flow sensor

3. PIR sensor

4. Humidity sensor

 

We are ISO9001: 2000 certificated enterprise, and all our products gained RoHS, CE, and UL (USA) certifications.

Currently, Winsen has gained over 60% gas sensor market share in China and exported products to over 80 countries worldwide. 

 

FAQ

 

1. Quality Guarantee

All products of Winsen are under strict inspection and testing before they come off the production line to make sure they are 100% qualified.

 

2. Sample Order
Sample order is accepted, and the fees will be borne by buyer.
Sample cost will be refunded upon big order placed.

 

3. Customized 
Customer LOGO and packing design are accepted. 
Customized design and function will be offered freely (including molding).

 

4. MOQ
Different products model have different MOQ, pls contact us for details.

 

5. Payment methods
T/T, Western union, etc.

 

6. Lead Time
Reference lead times: 3~15days after receiving the deposit.
The actual lead time can be informed by Order Processing Dept. when ordering.

 

7. Shipping
Winsen select the most appropriate way of transportation, according to customer's requirement.
We ensure the on time shipment by choosing experienced forwarder.

 

Contact Us

 

Telephone: 86-371-67169097

 

Fax: 86-371-60932988

 

Mail: sales(at)winsensor.com

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $83,000
Learn More